Best Selling Round Ducting Attenuators Flexible Air Ducting

Round Ducting Silencers Noise Reducer Silencer for Inline Duct Fan, Duct silencer attenuator with a male-end which slides inside spiral ducting tube. 

- Suitable for high, medium and low pressure applications
- Attenuators for attenuate noise in ventilation and air conditioning ducts and air conditioning ducts

 

1. Product Introduction

Round Ducting Silencers for round ducts with connections in accordance with spiral duct standards. The silencers are effective in reducing noise in the duct, external cover made from circular duct with a 50mm glass fiberglass wool attenuating layer. In installations where noise reduction is particularly important, two silencers can be used together.
This is very effective for the most efficient noise reduction and the silencer should be placed immediately behind the fan or elbow. The silencer should be used in conjunction with an insulated fan, as noise reduction is required in both the duct and the surroundings.
Stop the spread of sound wave and allow air flow to get through the ducting,Easy to connect to the air power equipment.Perfect for reducing noise from fans and carbon filter systems.
The Round Ducting Silencers are part of the Spiral fitting range; RS is with factory-installed EPDM rubber gaskets.  The double gasket ensures tight and permanent connections between system components that are air-tight and do not require the use of mastic or sealant.

2.Product Parameter (Specification)

- Easy to install on circular ducts
- Effective reduction of noise in the duct
- More than one silencer can be used simultaneously where noise reduction is particularly demanding Particularly strong requirements
- Other sizes available on request
- Saves time - quick and easy installation
- Air-tight - no risk of leakage due to the class D rated EPDM rubber gaskets
- Neat - ideal for exposed areas, as no need to use sealants
- The inner casing is made of perforated sheet steel
- Inside filled with 50mm thickness sound-absorbent Fiberglass Wool
- External threaded connection for direct installation in spiral pipes
- Excellent class D airtightness
- Time saving (up to 40% labour saving!) .
- Cost-effective (reduces labour costs)
- Clean installation (ideal for exposed installations)